Modeling and assessing the effects of land use changes on runoff generation with the CLUE-s and WetSpa models     

Mohammady  Majid  Moradi  Hamid Reza  Zeinivand  Hossein  Temme  A.J.A.M.  Yazdani  Mohammad Reza  Pourghasemi  Hamid Reza 《Theoretical and Applied Climatology》2018,133(1-2):459-471

Theoretical and Applied Climatology - Land use change is an important determinant of hydrological processes and is known to affect hydrological parameters such as runoff volume, flood frequency,...  相似文献   

Direct CPT and CPTu methods for determining bearing capacity of helical piles     

Amir Mansour Askari Fateh  Ahmad Fahimifar 《Marine Georesources & Geotechnology》2017,35(2):193-207

Helical piles are structural deep foundation elements, which can be categorized as torque-driven piles without any limitations to implement in marine situations. Different methods are used to predict the axial capacity of helical piles, such as static analysis, but have some limitation for this type of piles on marine conditions. In situ testing methods as supplement of static analysis have been rarely used for helical piles. In geotechnical engineering practice, the most common in situ tests particularly applicable for coastal or offshore site investigation are cone penetration test (CPT) and piezocone penetration test (CPTu). The CPT is simple, repeatable, and prepares the continuous records of soil layers. In this paper, a data bank has been compiled by collecting the results of static pile load tests on thirty-seven helical piles in ten different sites including CPT or CPTu data. Axial capacities of thirty-seven helical piles in different sites were predicted by direct CPT methods and static analysis. Accuracy estimation of ten direct CPT methods to predict the axial capacity of helical piles was investigated in this study. Comparisons have been made among predicted values and measured capacity from the pile load tests. Results indicated that the recently developed methods such as NGI-05 (2005), ICP-05 (2005), and UWA-05 (2005) predicted axial capacity of helical piles more accurately than the other methods such as Meyerhof (1983), Schmertmann (1978), Dutch (1979), LCPC (1982), or Unicone (1997). However, more investigations are required to establish better correlation between CPT data and axial capacity of helical piles.  相似文献   

Assessing the influence of watershed characteristics on soil erosion susceptibility of Jhelum basin in Kashmir Himalayas     

Muzamil Ahmad Rather  J Satish Kumar  Majid Farooq  Humayan Rashid 《Arabian Journal of Geosciences》2017,10(3):59

Soil erosion, a serious environmental problem, is a global challenge. Once a portion of a fertile soil is lost, it is very difficult to replace it, and this leads to decrease in crop production, damage to drainage networks, and siltation of dams and reservoirs. Human practices like intensive agriculture, overgrazing, and deforestation have intensified the rate of soil erosion all over the world. The Jhelum basin which forms the north-western part of the complex mountain system Himalayas is not only highly vulnerable to natural hazards like earthquakes, landslides, and floods but is also highly susceptible to soil erosion. There is an immediate need to device strategies to reduce adverse impacts of soil erosion and to conserve natural resources like soil, water, and forests by means of proper watershed management programs in the Himalayan region. The present study is carried out for eight upper watersheds of Jhelum basin, an area which are facing serious issues like boulder extraction, deforestation, and unplanned urbanization. The present work demonstrates the use of morphometry, land use, and slope coupled with the multicriteria analytical (MCA) framework to estimate the soil erosion susceptibility of these watersheds using Remote Sensing and Geographical Information System techniques. The present study revealed that out of eight upper watersheds, Arapal, Lidder, and Bringi fall in high priority and need immediate attention and measures to reduce soil erosion in the area. Sandran, Rembiara, and Romshii fall in medium priority. Kuthar and Vishav fall in the low-priority category and are least susceptible to soil erosion.  相似文献   

Geochemistry and origin of Dehoo manganese deposit,south Zahedan,southeastern Iran     

Mohammad Lotfi  Mahmoudreza Kahrazehi  Majid Ghaderi 《Arabian Journal of Geosciences》2017,10(6):142

Dehoo manganese deposit is located 52 km to the south of Zahedan in Sistan and Baluchestan Province, southeastern Iran. This deposit that lies in the central part of the Iranian Flysch Zone is lenticular in shape and lies above the micritic limestone-radiolarite cherts of the upper Cretaceous ophiolite unit. It is hosted within the reddish to brown radiolarite cherts and in places interlinks with them, so that the radiolarite chert packages play a key role for Mn mineralization in the region. Investigated ore-paragenetic successions and the geochemical characteristics of the Dehoo deposit were studied by means of major oxide, trace, and rare earth element (REE) contents that provide information as to the mineral origin. Strong positive correlations were found between major oxides and trace elements (Al₂O₃-TiO₂, r = 0.95; TiO₂-MgO, r = 0.94; Fe₂O₃-Al₂O₃, r = 0.90; MgO-Al₂O₃, r = 0.84; MgO-Fe₂O₃, r = 0.88; Fe₂O₃-TiO₂, r = 0.91; Fe₂O₃-K₂O, r = 0.74; Al₂O₃-K₂O, r = 0.69; Al₂O₃-V, r = 0.72; TiO₂-V, r = 0.73, and MgO-V, r = 0.69) that testify to the contribution of mafic terrigenous detrital material to the deposit. Chondrite-normalized REE patterns of all ore samples are characterized by negative Ce (0.06–0.15, average 0.10) and slightly positive Eu (0.29–0.45, average 0.36) anomalies. Based on ratios of Mn/Fe (average 56.23), Co/Ni (average 0.33), Co/Zn (average 0.38), U/Th (average 3.40), La/Ce (average 1.45), La_n/Nd_n (average 2.16), Dy_n/Yb_n (average 0.33), and light REE/heavy REE (average 8.40; LREE > HREE), as well as Ba (average 920 ppm) and total REE contents (average 6.96 ppm) negative Ce and positive Eu anomalies, Dehoo could be considered a predominantly submarine hydrothermal Mn deposit complemented by terrigenous detrital mafic material.  相似文献   

The effect of different meteorological parameters on the temporal variations of reference evapotranspiration     

Neda Khanmohammadi  Hossein Rezaie  Majid Montaseri  Javad Behmanesh 《Environmental Earth Sciences》2017,76(15):540

Temporal changes of meteorological variables can affect reference evapotranspiration (ET₀). The goal of the present research is to analyze the changes of ET₀ and identify the impact of effective meteorological parameters to the changes of ET₀. For this purpose, daily meteorological data recorded in 30 synoptic stations of Iran during 1960–2014 were used. The annual and seasonal values of ET₀ were calculated by the recorded data. To calculate ET₀, FAO56 Penman–Monteith method (standard method) was used. The annual and seasonal trends of ET₀ and its eight effective parameters were analyzed. Then the contributions of effective parameters changes on ET₀ were determined. To analyze ET₀ trend at annual and seasonal scales, two common methods, Spearman’s Rho and Mann–Kendall tests, were used. The R ² = 0.99 showed that the results of the mentioned methods were similar and on the basis of T-statistic <0.057, their difference was not significant (95% confidence level). Therefore, only one method’s results (Spearman’s Rho) were reported. On the basis of Spearman’s Rho results, the annual and seasonal values of ET₀ had negative trend in most of arid and semi-arid stations while the trend of this parameter was positive in humid and very humid stations. At annual and seasonal scales, decreasing in wind speed (W), temperature (T), sunshine hours (n), minimum temperature (TN), dew point temperature (TD), maximum temperature (TX), saturation vapor pressure deficit (SVPD) and solar radiation (RS) was observed in 58, 54, 39, 43, 56, 65, 65 and 37% studied stations, respectively. In many scales, the results showed that TX and W were the most effective meteorological variables on ET₀ changes and then SVPD was located in second step in arid and semi-arid stations. In humid and very humid stations, W was the first effective parameter at all scales, except autumn.  相似文献   

Sequence signal processing of 2012 Ahar–Varzaghan earthquake (<Emphasis Type="Italic">M</Emphasis><Subscript>W</Subscript> 6.4) of NW Iran     

Majid Nemati 《Environmental Earth Sciences》2017,76(14):495

Before starting seismic cycle of Ahar–Varzaghan 2012 event, a partial gap in the form of a pre-seismic calm sequence (seismicity rate, r = 0.46 event/year, b = 1.4) with duration of 303 days spatially has dominated over the entire seismogenic area. From April 17, 2012, to May 31, 2012, r significantly increased to 2.16, indicating strong foreshock sequence, and b value changed to 1.9, remarkably. In the last two months before the mainshock, foreshocks have partially migrated toward the earthquake fault (with a decrease in size, b = 2.0). Significantly, high rate of seismicity and low V _P /V _S (1.64) in the foreshocks sequence and also very high seismicity rate (17.3) and high V _P /V _S (1.76) in the aftershocks sequence make substantial differences between the seismic cycle and the background seismicity. Moreover, a significant E–W migration of the microseismicity was confirmed in the study area.  相似文献   

Landfill site selection using combination of fuzzy logic and multi-attribute decision-making approach     

Ahmad Jamshidi-Zanjani  Majid Rezaei 《Environmental Earth Sciences》2017,76(13):448

During the last decades, growth of urbanization and industrialization led to an increase in solid waste generation. Landfilling is the most prevalent ultimate disposal method for the municipal solid wastes in developing countries. The rapid municipal solid waste generation in Markazi province (central part of Iran) causes the need for precision in finding a suitable landfill site selection. In the present study, 12 factors (environmental and socioeconomic factors) have been applied to select the landfill site in Markazi province, Iran. The different methods including the analytic network process (ANP) combined with fuzzy linguistic quantifier, ordered weighted average (OWA), and weighted linear combination (WLC) approach in geographic information system was applied to find an appropriate landfill site. The OWA operator function permits the evaluation of the wide spectrum of consequences (with different scenario) obtained from different management strategies. Results revealed that integration of fuzzy logic, ANP, and OWA provides flexible and better ideas compared to the Boolean logic and WLC to select a suitable landfill site.  相似文献   

Denoising and improving the quality of seismic data using combination of DBM filter and FX deconvolution     

Majid Bagheri  Mohammad Ali Riahi  Hosein Hashemi 《Arabian Journal of Geosciences》2017,10(19):440

Seismic data denoising, random noise attenuation (RNA) and spike-like noise suppression, is a main consideration for improving the quality of records. RNA could increase signal to noise ratio (S/N) to avoid misinterpretation of seismic data. In this research, a novel method is created by using the combination of frequency-offset deconvolution (FXD) and decision-based median (DBM) filter for RNA from seismic data. The method is applied in two main phases; FXD is focused to remove the Gaussian noise and DBM filter is focused to attenuate the impulsive noise and spikes. To implement and verify the method, three types of data are used: two synthetic models (a model with linear events and a model with hyperbolic events) and an observed seismic section. The ability of the proposed method (FXD-DBM) in comparison of applying each in seismic RNA application is proven. The noise level is reduced obviously, and hence, the S/N of all examined seismic records is increased considerably after denoising by the combination of FX deconvolution and DBM filter. About the real seismic section, suppressing random noise and spikes show up improving the seismic reflector continuity and hence enhancing the interpretability of data. Moreover, some masked events by random noise are clarified in different parts of data after denoising using the planned method.  相似文献   

Interpretation of magnetic and gravity gradient tensor data using normalized source strength – A case study from McFaulds Lake,Northern Ontario,Canada     

Majid Beiki  Pierre Keating  David A. Clark 《Geophysical Prospecting》2014,62(5):1180-1192

In this paper, we present a case study on the use of the normalized source strength (NSS) for interpretation of magnetic and gravity gradient tensors data. This application arises in exploration of nickel, copper and platinum group element (Ni‐Cu‐PGE) deposits in the McFaulds Lake area, Northern Ontario, Canada. In this study, we have used the normalized source strength function derived from recent high resolution aeromagnetic and gravity gradiometry data for locating geological bodies. In our algorithm, we use maxima of the normalized source strength for estimating the horizontal location of the causative body. Then we estimate depth to the source and structural index at that point using the ratio between the normalized source strength and its vertical derivative calculated at two levels; the measurement level and a height h above the measurement level. To discriminate more reliable solutions from spurious ones, we reject solutions with unreasonable estimated structural indices. This method uses an upward continuation filter which reduces the effect of high frequency noise. In the magnetic case, the advantage is that, in general, the normalized magnetic source strength is relatively insensitive to magnetization direction, thus it provides more reliable information than standard techniques when geologic bodies carry remanent magnetization. For dipping gravity sources, the calculated normalized source strength yields a reliable estimate of the source location by peaking right above the top surface. Application of the method on aeromagnetic and gravity gradient tensor data sets from McFaulds Lake area indicates that most of the gravity and magnetic sources are located just beneath a 20 m thick (on average) overburden and delineated magnetic and gravity sources which can be probably approximated by geological contacts and thin dikes, come up to the overburden.  相似文献   

Application of the Ordered Weighted Averaging (OWA) method to the Caspian Sea conflict   总被引：1，自引：0，他引：1  

Hojjat Mianabadi  Majid Sheikhmohammady  Erik Mostert  Nick Van de Giesen 《Stochastic Environmental Research and Risk Assessment (SERRA)》2014,28(6):1359-1372

This study proposes a promising allocation mechanism of the Caspian Sea natural resources, which are presently shared among five countries. To date, these nations have been unable to reach an allocation agreement. We apply a methodology to propose the most appropriate solution under different risk attitudes of the states. This research is different from other studies regarding the Caspian Sea negotiations in that it employs risk-based fuzzy multi attribute decision making methods for simulating the risk attitudes or optimism/pessimism degrees of the decision makers. The ordered weighted averaging (OWA) approach, which considers the optimism/pessimism degree quantitatively, is used to take into account the effects of different risk attitudes of the negotiators on the final outcome. We demonstrate how one could obtain a range of alternatives under different multi attribute and risk attitudes. The induced OWA (IOWA) method is also used to determine the relative power of these states bordering the Caspian Sea by considering several attributes, including different risk attitudes of agents. Results indicate that taking into account the risk attitude (prone, neutral, averse) of the states can affect the overall ranking of the proposed solutions. The findings from this study may facilitate negotiation regarding the most preferred allocation mechanism for the Caspian Sea.  相似文献